Reactions of the Group 2 elements with water (2023)


This page looks at the reactions of the Group 2 elements - beryllium, magnesium, calcium, strontium and barium - with water (or steam). It uses these reactions to explore the trend in reactivity in Group 2.

The Facts


Beryllium reacts with steam at high temperatures (typically around 700°C or more) to give white beryllium oxide and hydrogen. (Equation just like the magnesium one below.)

Note: Until November 2016, at this point I had the statement: "Beryllium has no reaction with water or steam even at red heat." This was commonly quoted in textbooks, and my sources were a degree level inorganic book, and a later A level inorganic book.

However, a researcher in the development of nuclear fusion pointed out to me that a lot of work is being done on the reaction between beryllium and steam because it could be a safety issue in reactor design, and sent me a photo showing the result of exposing beryllium to steam at 800°C. It definitely reacts.

I think the problem is that beryllium is both expensive and carries major health risks. This means that few teachers will ever have handled it - I certainly haven't. That means that textbook (or these days, web) statements about it never get checked, and are just passed on regardless of their accuracy. I apologise for my part in this.


Magnesium burns in steam to produce white magnesium oxide and hydrogen gas.

Mg(s) + H2O(g) Reactions of the Group 2 elements with water (1) MgO(s) + H2(g)

Very clean magnesium ribbon has a very slight reaction with cold water. After several minutes, some bubbles of hydrogen form on its surface, and the coil of magnesium ribbon usually floats to the surface. However, the reaction soon stops because the magnesium hydroxide formed is almost insoluble in water and forms a barrier on the magnesium preventing further reaction.

Mg(s) + 2H2O(l) Reactions of the Group 2 elements with water (2) Mg(OH)2(s) + H2(g)

Note: As a general rule, if a metal reacts with cold water, you get the metal hydroxide. If it reacts with steam, the metal oxide is formed. This is because the metal hydroxides thermally decompose (split up on heating) to give the oxide and water.

Calcium, strontium and barium

These all react with cold water with increasing vigour to give the metal hydroxide and hydrogen. Strontium and barium have reactivities similar to lithium in Group 1 of the Periodic Table.

Calcium, for example, reacts fairly vigorously with cold water in an exothermic reaction. Bubbles of hydrogen gas are given off, and a white precipitate (of calcium hydroxide) is formed, together with an alkaline solution (also of calcium hydroxide - calcium hydroxide is slightly soluble).

The equation for the reactions of any of these metals would be:

Reactions of the Group 2 elements with water (3)X(s) + 2H2O(l) Reactions of the Group 2 elements with water (4) X(OH)2(aq or s) + H2(g)

The hydroxides aren't very soluble, but they get more soluble as you go down the Group. The calcium hydroxide formed shows up mainly as a white precipitate (although some does dissolve). You get less precipitate as you go down the Group because more of the hydroxide dissolves in the water.

Summary of the trend in reactivity

The Group 2 metals become more reactive towards water as you go down the Group.

Explaining the trend in reactivity

Beryllium as a special case

There is an additional reason for the lack of reactivity of beryllium compared with the rest of the Group. Beryllium has a strong resistant layer of oxide on its surface which lowers its reactivity at ordinary temperatures. However, the oxide layer breaks up above 750°C and exposes the beryllium metal surface below it, and so the protection then fails.

Looking at the enthalpy changes for the reactions

The enthalpy change of a reaction is a measure of the amount of heat absorbed or evolved when the reaction takes place. An enthalpy change is negative if heat is evolved, and positive if it is absorbed. That's really all you need to know for this section!

Note: If you aren't happy about enthalpy changes, you might want to explore the energetics section of Chemguide, or my chemistry calculations book.

If you calculate the enthalpy change for the possible reactions between beryllium or magnesium and steam, you come up with these answers:

Be(s) + H2O(g) Reactions of the Group 2 elements with water (5) BeO(s) + H2(g) ΔH = -369 kJ mol-1

Mg(s) + H2O(g) Reactions of the Group 2 elements with water (6) MgO(s) + H2(g) ΔH = -360 kJ mol-1

Notice that both possible reactions are strongly exothermic, giving out almost identical amounts of heat. However, the magnesium reaction is much faster. The explanation for the different reactivities must lie somewhere else.

Similarly, if you calculate the enthalpy changes for the reactions between calcium, strontium or barium and cold water, you again find that the amount of heat evolved in each case is almost exactly the same - in this case, about -430 kJ mol-1.

The reason for the increase in reactivity must again lie elsewhere.

Looking at the activation energies for the reactions

The activation energy for a reaction is the minimum amount of energy which is needed in order for the reaction to take place. It doesn't matter how exothermic the reaction would be once it got started - if there is a high activation energy barrier, the reaction will take place very slowly, if at all.

When Group 2 metals react to form oxides or hydroxides, metal ions are formed.

Note: This is a simplification in the case of beryllium. Beryllium oxide isn't fully ionic. There isn't enough electronegativity difference between the beryllium and oxygen for the beryllium to lose control of the bonding pair of electrons and form ions. The approach we are taking here is in line with the sort of answer that you would be expected to give at A level. Thinking about beryllium as an entirely different case would make this argument unnecessarily complicated.

The formation of the ions from the original metal involves various stages all of which require the input of energy - contributing to the activation energy of the reaction. These stages involve the input of:

  • the atomisation energy of the metal. This is the energy needed to break the bonds holding the atoms together in the metallic lattice.

  • the first + second ionisation energies. These are necessary to convert the metal atoms into ions with a 2+ charge.

After this, there will be a number of steps which give out heat again - leading to the formation of the products, and overall exothermic reactions.

The graph shows the effect of these important energy-absorbing stages as you go down Group 2.

Reactions of the Group 2 elements with water (7)

Notice that the ionisation energies dominate this - particularly the second ionisation energies. Ionisation energies fall as you go down the Group. Because it gets easier to form the ions, the reactions will happen more quickly.

Note: If you are unhappy about the changes in ionisation energy as you go down Group 2 you should follow this link. You will find a further link to a wider discussion of ionisation energy if you need it.

Summarising the reason for the increase in reactivity as you go down the Group

The reactions become easier as the energy needed to form positive ions falls. This is mainly due to a decrease in ionisation energy as you go down the Group. This leads to lower activation energies, and therefore faster reactions.

Questions to test your understanding

If this is the first set of questions you have done, please read the introductory page before you start. You will need to use the BACK BUTTON on your browser to come back here afterwards.

questions on the reactions of Group 2 elements with water


Where would you like to go now?

To the Group 2 menu . . .

To the Inorganic Chemistry menu . . .

To Main Menu . . .

© Jim Clark 2002 (last modified December 2021)


What are the reactions of Group 2 with water? ›

Group 2 elements react readily with cold water to form a metal hydroxide and hydrogen. The reactions of group 2 metals with water is a redox as Group 2 elements are oxidised from an oxidation state of 0 to +2. Hydrogen is reduced from a +1 state to 0. The group 2 elements form +2 ions with then react with water.

Why do group 2 elements react with water? ›

This is because the metal hydroxides thermally decompose (split up on heating) to give the oxide and water. These all react with cold water with increasing vigour to give the metal hydroxide and hydrogen.

How do the reaction of group 2 elements with water vary down the group? ›

The overall trend, for the reactivity of Group 2 metals with water, is an increase down the group. The outer electrons are easier to remove as they are further from the nucleus and there is more shielding resulting in a lower nuclear attraction.

Which group 2 elements Cannot react with water? ›

Group 2: Alkaline Earth Metals

Beryllium (Be) is the only alkaline earth metal that does not react with water. This is due to its small size and high ionization energy in relation to the other elements in the group.

What type of chemical reaction is this 2 H2O → 2 H2 O2? ›

The correct option is D Decomposition reaction.

What type of reaction is 2 H2O → 2 H2 O2? ›

The molecules of water (H2O) are split and molecules of hydrogen gas (H2) and oxygen gas (O2) are formed. 2. You are performing a chemical reaction by mixing two liquids together.


1. Alkaline Earths - Group 2 Properties
(Angles and Acid)
2. Trend in Reactivity of group 2 Elements - AS Chemistry
(A Level Scientist)
3. Reactions of Group 2 Elements - AS Chemistry
(A Level Scientist)
4. Reactions of Alkaline Earth Metals with Oxygen
5. A Level Chemistry Revision "Redox Reactions of Group 2 Elements with Oxygen and Water".
6. Group 2 - Alkaline Earth Metals | Properties of Matter | Chemistry | FuseSchool
(FuseSchool - Global Education)


Top Articles
Latest Posts
Article information

Author: Edwin Metz

Last Updated: 06/08/2023

Views: 6505

Rating: 4.8 / 5 (78 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Edwin Metz

Birthday: 1997-04-16

Address: 51593 Leanne Light, Kuphalmouth, DE 50012-5183

Phone: +639107620957

Job: Corporate Banking Technician

Hobby: Reading, scrapbook, role-playing games, Fishing, Fishing, Scuba diving, Beekeeping

Introduction: My name is Edwin Metz, I am a fair, energetic, helpful, brave, outstanding, nice, helpful person who loves writing and wants to share my knowledge and understanding with you.